DataTank™ Container Unit 1.4MW

The DataTank™ container modules are designed for inexpensive, efficient and rapid cluster deployment.

The DataTank™ container modules are designed for inexpensive, efficient and rapid cluster deployment. The standard configuration of the DataTank™ Container Unit is no less than 1.4 Megawatts per prefabricated container and tanks can be equipped with high performance condensers of up to 500kW per flat rack tank for extremely demanding applications. Tanks are provided with 19-inch rails, Open Rack or custom form factors will be available in the future.

DataTank™ modules are our third generation systems for 3M™ Novec™ Engineered Fluids, designed for a a PUE of 1.01 or less even in hot and humid Asia. Using passive 2-phase immersion cooling guarantees highly efficient systems, no matter in cold climates, hot climates, or harsh environments such as the desert. Hardware is always cooled efficiently and without any temperature fluctuations.

All DataTank™ systems are built into ISO container modules and can be handled using standard equipment such as cranes, ships, trucks and trailers. Multiple containers can be stacked and combined for large-scale container farm deployments. On demand, the DataTank™ infrastructure can also be installed into traditional brick-and-mortar facilities.

More Information

Modular Containerized Data Center

  • Complete turnkey solution, including power, fluids and cooling
  • Lowest PUE guaranteed, even in demanding climates
  • Lowest build cost per kW compared to any other solution
  • Plug and play – only requires power feed and internet

Technical Features

  • For 6 DataTank™ Immersion Cooling Racks of 200-252kW each
  • Removes mechanical overhead on facility and device level
  • Fully redundant cooling system, N+1
  • Fully automated system, including monitoring (HTTP, SNMP, Modbus)
  • No CRACs, air handlers or hot/cold aisle needed

Quality & Options

  • Integrated security and remote HD camera monitoring
  • Thermal insulation and various build-out options
  • Manufactured in the USA with American and German parts
  • OEM or co-branding options available
  • Patent pending technology

Modular Immersion Cooling Tanks for 200-250kW

DataTank™ Flat Racks are modular immersion cooling tanks with standard capacities of 200-252kW. For extremely demanding applications, tanks can be equipped with high performance condensers of up to 500kW per flat rack tank. Current systems are provided with 19-inch rails, Open Rack or custom form factors will be available in the future.

DataTank™ Flat Racks are designed for our DataTank™ Container Units. Tanks for installation in traditional brick-and-mortar facilities are available on demand.

Technical Features

  • Universal 19-Inch design, fits any hardware (1U, 1.5U, etc)
  • Built for HPC, including GPU, CPU or ASIC based systems
  • Up to 500kW per tank with high performance condenser option
  • Advanced hot swap condenser options
  • Integrated vent keeps fluid and vapor inside and dirt/dust outside
  • OpenRack or custom size available on request
  • Integrated 800 Amp 3-phase power feed to each tank
  • No raised floor or high ceiling requirement

Quality & Standards

  • Designed for minimized vapor or fluid losses and minimized fluid usage
  • Manufactured in the USA with American and German parts
  • OEM or co-branding options available
  • Patent pending technology

3M™ Novec™ Engineered Fluids

  • Environmentally friendly, non-toxic and non-flammable
  • Various fluids and boiling points (34°C, 49°, 56°C, etc)
  • Fluids are odorless and not oily (hardware comes out dry)
  • Fluids are non-conductive and inert, useful life of 30 years
  • Inherent fire protection

For a immersion cooling project evaluation, feel free to use our contact us. You’ll be surprised how beneficial immersion cooling can be, even on a smaller scale.